DG-10Y030D
Model No. Page
GW5DGC**M04
15 of 18
7. Precautions
① Storage conditions
Please follow the conditions below.
? Before opened: Temperature 5 ~ 30 ℃ , Relative humidity less than 60 %.
(Before opened LED should be used within a year)
? After opened: Temperature 5 ~ 30 ℃ , Relative humidity less than 60 %.
(Please apply soldering within 1 week)
? After opened LED should be kept in an aluminum moisture proof bag with a moisture
absorbent material (silica gel).
? Avoid exposing to air with corrosive gas.
If exposed, electrode surface would be damaged, which may affect soldering.
② Usage conditions
This product is not designed for the use under any of the following conditions.
Please confirm performance and reliability well enough if you use under any of the following conditions;
? In a place with a lot of moisture, dew condensation, briny air, and corrosive gas.
(Cl, H 2 S, NH 3 , SO 2 , NO X, etc.)
? Under the direct sunlight, outdoor exposure, and in a dusty place.
? In water, oil, medical fluid, and organic solvent.
③ Heat radiation
If forward current (I F ) is applied to single-state module at any current, there is a risk of damaging LED
or emitting smoke.
Equip with specified heat radiator, and avoid heat stuffed inside the module.
④ Installation
Material of board is alumina ceramic. If installed inappropriately, trouble of no radiation may occur due to
board crack or overheat. Please take particular notice for installation.
Refer to the following cautions on installation.
? Apply thermolysis adhesive, adhesive sheet or peculiar connector when mounted on heat radiator.
In case of applying adhesive or adhesive sheet only, check the effectiveness and reliability before fixing.
If LED comes off from heat radiator, unusual temperature rise entails hazardous phenomena including
device deterioration, coming off of solder at leads, and emitting smoke.
? When LED device is mechanically fixed or locked, Please take into consideration regarding the method of
attachment due to fail from stress.
? Avoid convexly uneven boards.
Convex board is subject to substrate cracking or debasement of heat release.
? It is recommended to apply adhesive or adhesive sheet with high thermal conductivity
for radiation of heat effectively.
? Please take care about the influence of color change of adhesive or adhesive sheet in initial and long term
period, which may affect light output or color due to change of reflectance from backside.
相关PDF资料
GW5DGC30M04 LED MOD 25WATT ZENIGATA 3025K
PGG-0125 GROUND REFERENCE MODULE 125 VDC
P51-100-S-Y-P-5V-000-000 SENSOR 100PSIS 7/16 5V
1.90560.1020000 LAMP NEOP 220VAC RED BA 9SBASE
P51-75-S-Y-P-5V-000-000 SENSOR 75PSIS 7/16 5V
P51-300-G-M-P-5V-000-000 SENSOR 300PSI M10-1.0 6G 1-5V
P51-200-G-M-P-5V-000-000 SENSOR 200PSI M10-1.0 6G 1-5V
PT-121-B-C11-EPC BIG CHIP LED HB MODULE BLUE
相关代理商/技术参数
GW5DGC50M04 功能描述:LED照明模块 25W Meg Zenigata 5000K 2080LM 90CRI RoHS:否 制造商:Cree, Inc. 产品:LED Modules LED 数量:1 照明颜色:Neutral White 射束角:96 deg 波长/色温:3500 K 光强度: 光通量:3000 lm 宽度: 长度:88.2 mm 系列: 封装:Bulk
GW5DGC65M04 功能描述:LED照明模块 25W Meg Zenigata 6500K 2080LM 90CRI RoHS:否 制造商:Cree, Inc. 产品:LED Modules LED 数量:1 照明颜色:Neutral White 射束角:96 deg 波长/色温:3500 K 光强度: 光通量:3000 lm 宽度: 长度:88.2 mm 系列: 封装:Bulk
GW5DGE27MR5 功能描述:大功率LED - 白色 47.5W Mega Zenigata 2700K, 3590LM, 93CRI RoHS:否 制造商:Cree, Inc. 照明颜色:Cool White 颜色温度:5000 K 光通量:280 lm 显示角:125 deg 正向电流:700 mA 正向电压:2.9 V 安装风格:SMD/SMT 系列:XMLBWW 封装:Reel
GW5DGE27MR5-SAMPLES 制造商:Sharp Microelectronics Corporation 功能描述:
GW5DGE30MR5 功能描述:大功率LED - 白色 47.5W Mega Zenigata 3000K, 3670LM, 93CRI RoHS:否 制造商:Cree, Inc. 照明颜色:Cool White 颜色温度:5000 K 光通量:280 lm 显示角:125 deg 正向电流:700 mA 正向电压:2.9 V 安装风格:SMD/SMT 系列:XMLBWW 封装:Reel
GW5DGE30MR5-SAMPLES 制造商:Sharp Microelectronics Corporation 功能描述:
GW5DGE35MR5 功能描述:大功率LED - 白色 47.5W Mega Zenigata 3500K, 3740LM, 93CRI RoHS:否 制造商:Cree, Inc. 照明颜色:Cool White 颜色温度:5000 K 光通量:280 lm 显示角:125 deg 正向电流:700 mA 正向电压:2.9 V 安装风格:SMD/SMT 系列:XMLBWW 封装:Reel
GW5DGE40MR5 功能描述:大功率LED - 白色 47.5W Mega Zenigata 4000K, 3850LM, 92CRI RoHS:否 制造商:Cree, Inc. 照明颜色:Cool White 颜色温度:5000 K 光通量:280 lm 显示角:125 deg 正向电流:700 mA 正向电压:2.9 V 安装风格:SMD/SMT 系列:XMLBWW 封装:Reel